mill-max receptacles with organic fibre plug ? solder barrier mill-max?s knock-out-bottom receptacles are discrete sockets for soldering into printed circuit boards. six sizes are now available: features: designed for hand, wave or reflow* soldering. the organic fibre plug? barrier prevents solder, paste or flux from contaminating the spring contact. after soldering, the ofp? barrier is knocked out of the receptacle when the device is plugged in. the thru-hole receptacle design permits the component lead to pass through and make connection with another circuit board. all mill-max receptacles use a precision machined brass housing with a press-fit beryllium copper ?multi- finger? contact (heat-treated becu is the best electrical spring contact material). all parts are available as discrete receptacles; #4015, #4280, #5364 & #9873 can also be supplied on carrier tape per eia-481 for industry standard pick and place machines. *intrusive reflow (also called "pin-in-paste") is a technique of using conventional thru-hole components in a reflow sol- dering process. the receptacles are placed into plated-thru-holes in the circuit board (solder paste has previously been screen printed on pads adjacent to the holes) and the board is reflowed in the same pass as other smt components. solder will fill the plated-thru-holes and achieve solder joints as reliable as wave soldering. the ofp? barrier prevents solder paste from being picked-up inside the contact during pick ?n place assembly. "overprinting" paste on the solder mask can be used to adjust the volume of paste required to fill each hole. r maximum interconnect solutions mill-max mfg. corp. ? 190 pine hollow road, oyster bay, ny 11771-0300 516-922-6000 fax: 516-922-9253 e-mail: techserv@mill-max.com or sales@mill-max.com www.mill-max.com max imum solutions (10/03-529, 535 ) #4015 & #9873 #0379 mill-max receptacle # incorporates contact # range of pin acceptance recommended mounting hole 5359 10 ?.012 - .017? ?.043 .003? 4015 30 ?.015 - .025? ?.057 .003? 4280 16 ?.022 - .034? ?.067 .003? 0379 34 ?.032 - .046? ?.077 .003? 9873 02 ?.040 - .050? ?.083 .003? 5364 23 ?.045 - .065? ?.103 .003?
.048 dia. .038 dia. .028 dia. .010 .009 .060 .071 5359-0-43-xx-10-xx-10-0 with ofp? solder barrier solder mount in .040 min. mounting hole. 4015-0-43-xx-30-xx-10-0 with ofp? solder barrier solder mount in .054 min. mounting hole. .068 dia. .052 dia. .043 dia. .020 .089 .100 .009 .078 dia. .062 dia. .056 dia. .051 dia. .020 .009 .089 .100 4280-0-43-xx-16-xx-10-0 with ofp? solder barrier solder mount in .064 min. mounting hole. .090 dia. .072 dia. .064 dia. .018 .125 .206 .009 0379-0-43-xx-34-xx-10-0 with ofp? solder barrier solder mount in .075 min. mounting hole. .100 dia. .078 dia. .068 dia. .030 .093 .125 .009 9873-0-43-xx-02-xx-10-0 with ofp? solder barrier solder mount in .080 min. mounting hole. 5364-0-43-xx-23-xx-10-0 with ofp? solder barrier solder mount in .100 min. mounting hole. .120 dia. .098 dia. .075 dia. .067 dia. .018 .009 .110 .125 .150 also available on 8mm wide carrier tape, 5,500 parts per 13? reel. order as: s740-xx-001-00-150000 also available on 8mm wide carrier tape, 5,500 parts per 13? reel. order as: s742-xx-001-00-800000 also available on 12mm wide carrier tape, 4,500 parts per 13? reel. order as: s798-xx-001-00-730000 also available on 12mm wide carrier tape, 2,000 parts per 13? reel. order as: s753-xx-001-00-640000
|
